路由 思科路由器系列软件安装与升级（7）

发布时间：2007.11.07 05:11 来源：赛迪网－网管员世界 作者：黄明

步骤6：重新启动路由器以加载新镜像

为使路由器运行新的Cisco IOS软件镜像，您需要重新加载路由器。请确保您已发出 copy running-config starting-config 命令或者 write memory 命令来保存配置。

3600#write memory

3d01h: %SYS-5-CONFIG_I: Configured from console by vty0 (127.0.0.11)

Building configuration...

3600#reload


步骤 7: 检验升级

当路由器开启后，请通过发出 show version 命令确保您当前运行的是新版本。

3640#show version

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-I-M), Version 12.2(7b), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Mon 04-Mar-02 20:23 by pwade

Image text-base: 0x600089A8, data-base: 0x60A6A000

ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (f)

Router uptime is 2 minutes

System returned to ROM by reload

System image file is "slot1:c3640-i-mz.122-7b.bin"

cisco 3640 (R4700) processor (revision 0x00) with 59392K/6144K bytes of memory.

Processor board ID 10524422

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

4 Ethernet/IEEE 802.3 inte***ce(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

4096K bytes of processor board System flash (Read/Write)

20480K bytes of processor board PCMCIA Slot0 flash (Read/Write)

20480K bytes of processor board PCMCIA Slot1 flash (Read/Write)

Configuration register is 0x2102

请检验是否正确使用了版本12.2（7b），且config - register设定为0x210


（责任编辑：高爽）